ZEROID X1

The ZEROID X1 is designed for the single-spec series emphasizing predominantly ability behind the wheel, prioritising driver skill and ingenuity above all else.

The 30kWh battery – which has been fully safety-tested – is mounted next to the driver in the centre of the car to ensure optimum, 50/50 weight distribution, while power is supplied evenly to the front and rear wheels by a pair of motors and inverters, all of which benefit from a cooling system to prevent excessive temperatures.

The motor of the ZEROID X1 generates 270 kW (362 bhp) of power and up to 510 Nm of torque. This represents a significant step forward compared to the previous Supercar Lites car, narrowing the gap to rallycross’ headlining class.

What’s more, in a first for rallycross, drivers will have three key parameters to play with before and between races, injecting an extra element of skill into the equation.

From inside the cockpit, competitors will be able to manually adjust the amount of torque produced by the front and rear motors, the total torque deployed by all four wheels during the launch and the degree of regenerative braking on the front and rear axles.

On the outside, noise will be generated by the howl of the drivetrain running at more than 12,000rpm as well as the gravel spray and tyre squeals so synonymous with rallycross, promising fans a mouth-watering feast of fast-paced entertainment.

Power

Battery

Max rpm

Powertrain
  • 30kWh RESS
  • Liquid-cooled during charging
  • 4WD – 2 independent motors (1 front & 1 rear, not connected)
  • Power = 270 kW (362bhp)
  • Torque = 510Nm
  • 12.500 max. rpm
Chassis/Braking System
  • Tubular frame
  • High-tensile strength steel
  • Double wishbone suspensions
  • Pushrod suspension
  • 3-way adjustable dampers
  • Lightweight brake calipers
Transmission
  • 2 independent reducers
  • LSD at each axle
  • Power and torque distribution adjustable by the driver
Body
  • Lightweight composite bodywork
  • Adjustable ergonomics on the seat,
    steering wheel and pedals
Electronics
  • Class-leading calculation capacity VCU
  • Fully customisable, feature-rich and quality dashboard
  • Smart driver keyboard and driver steering controls
Weight/Dimensions
  • Weight distribution 50% front – 50% rear
  • 1250kg
  • 4,050mm x 1,800mm x 1,500mm

  Download related documents:

RX2e Graphic Material

RX2e Technical Documents

To access these documents, please download them HERE.
If you don’t have the password, please contact us at customercare@qevtech.com.